NOCO Genius Boost GB40 Jump Starter Manual
Thank you for buying the NOCO Genius. Boost GB40. Read and understand the User Guide before operating the product. For questions regarding our jump starter, please contact NOCO at 1-800-466-2626 or visit our website at www.noco.com.
Introduction
The NOCO Genius Boost GB40 is an ultra-compact and portable lithium-ion jump starter that delivers 1,000 amps of power. It’s designed to jump-start a variety of vehicles, including cars, boats, trucks, and motorcycles. The GB40 also features a built-in USB port that can be used to charge your phone, tablet, or other electronic devices.
The GB40 is easy to use and comes with a comprehensive user guide that provides step-by-step instructions. The unit is also equipped with a variety of safety features, including spark-proof technology and reverse polarity protection. With its compact size and powerful performance, the GB40 is an ideal choice for anyone who wants a reliable and convenient jump starter.
The GB40 is a powerful battery booster that serves as a portable power source for charging USB devices such as smartphones, tablets, and more. It’s designed to start gasoline engines up to 6 liters and diesel engines up to 3 liters and can be used as a power source for charging USB devices. The GB40 features a high-capacity lithium-ion battery that can provide multiple jump starts on a single charge. It also has a built-in LED flashlight that can be used for emergency lighting.
The GB40 is a reliable and convenient jump starter that is perfect for anyone who wants a powerful and portable power source. It’s easy to use and comes with a comprehensive user guide that provides step-by-step instructions. The GB40 is also equipped with a variety of safety features, including spark-proof technology and reverse polarity protection. With its compact size and powerful performance, the GB40 is an ideal choice for anyone who wants a reliable and convenient jump starter.
What’s in the Box
The NOCO Genius Boost GB40 comes with everything you need to jump-start your vehicle. Here’s a complete list of what’s included⁚
- GB40 Lithium Jump Starter⁚ The heart of the system, this is the unit that provides the power for jump-starting your vehicle.
- Micro USB Cable⁚ This cable is used to charge the GB40 from a powered USB charger.
- 12V USB Charger⁚ This charger plugs into your vehicle’s cigarette lighter and provides a convenient way to charge the GB40.
- X Connect HD Battery Clamps⁚ These heavy-duty clamps are used to connect the GB40 to your vehicle’s battery.
- Drawstring Bag⁚ This bag provides a convenient way to store and carry the GB40 and its accessories.
- User Guide and Warranty⁚ The user guide provides detailed instructions on how to use the GB40, while the warranty information outlines the terms and conditions of coverage.
With all these components, the GB40 is ready to help you jump-start your vehicle in an emergency or provide power for your devices on the go.
NOCO Contact Information
NOCO is committed to providing exceptional customer support and ensuring your satisfaction with their products. If you have any questions, concerns, or need assistance with your NOCO Genius Boost GB40, you can reach out to them through various channels⁚
- Phone⁚ 1-800-466-2626
- Website⁚ www.noco.com
- Email⁚ You can find their email address on their website’s contact page.
- Social Media⁚ NOCO is active on various social media platforms, including Facebook, Twitter, and Instagram. You can reach out to them through these platforms for inquiries or to stay updated on their latest news and products.
NOCO’s dedicated customer support team is available to answer your questions, provide technical assistance, and address any issues you may encounter with your GB40. They are committed to resolving your concerns promptly and efficiently. You can also find a wealth of information and resources on their website, including user manuals, FAQs, troubleshooting guides, and more.
About the GB40
The NOCO Genius Boost GB40 is a powerful and compact jump starter designed to provide reliable assistance in jump-starting a variety of vehicles, including cars, boats, trucks, and more. This ultra-safe lithium-ion jump starter packs a punch with its 1,000-amp output, making it capable of jump-starting even the most stubborn batteries;
The GB40’s lightweight and portable design makes it easy to carry and store. It features a durable and weather-resistant construction, ensuring that it can withstand the elements and be ready for any situation. The GB40 also incorporates several safety features to protect both you and your vehicle during the jump-starting process.
Beyond its jump-starting capabilities, the GB40 is also equipped with a USB port, allowing you to charge your electronic devices, such as smartphones, tablets, and other portable gadgets. This makes the GB40 a versatile tool, providing you with a reliable power source on the go.
Getting Started
Before you begin using the GB40, it’s crucial to familiarize yourself with the included components and their functions. The GB40 comes packaged with the following items⁚
- GB40 Lithium Jump Starter
- Micro USB Cable
- 12V USB Charger
- X Connect HD Battery Clamps
- Drawstring Bag
- User Guide and Warranty Information
The first step is to ensure that the GB40 is fully charged. Connect the Micro USB cable to the USB IN port on the GB40 and plug the other end into the provided 12V USB charger or any powered USB charger. The Charge LEDs will illuminate to indicate the charging status.
When the GB40 is fully charged, it’s ready to be used for jump-starting your vehicle. Before proceeding, make sure that all power loads in the vehicle, such as headlights, radio, and air conditioning, are turned off.
Connecting to the Battery
Connecting the GB40 to the battery of your vehicle is a straightforward process, but it’s essential to follow the correct steps to ensure safety and avoid any potential damage. Here’s a step-by-step guide⁚
- Locate the Battery⁚ Open the hood of your vehicle and locate the battery. The battery is typically a rectangular black box with red and black terminals.
- Connect the Red Clamp⁚ Take the red clamp (marked “+” or “POS”) and securely connect it to the positive (+) terminal of the battery. Ensure a tight connection to prevent any loose contacts.
- Connect the Black Clamp⁚ Take the black clamp (marked “-” or “NEG”) and connect it to a metal grounding point on the vehicle’s frame or engine block. It’s important to avoid connecting the black clamp directly to the negative (-) terminal of the battery, as this can cause sparks and potentially damage the GB40.
- Double Check Connections⁚ After connecting both clamps, visually inspect the connections to make sure they are secure and there are no loose wires.
Once the GB40 is securely connected to the battery, you’re ready to proceed with jump-starting your vehicle.
Jump-Starting
With the GB40 connected to the battery, you are ready to jump-start your vehicle. Follow these simple steps for a successful jump-start⁚
- Turn on the GB40⁚ Press and hold the power button on the GB40 until the Boost LED starts flashing white. This indicates that the GB40 is ready to jump-start.
- Start the Vehicle⁚ Attempt to start the vehicle as you normally would. If the vehicle starts, you’ve successfully jumped it.
- Disconnect the GB40⁚ Once the vehicle is running, immediately disconnect the GB40 by first removing the black clamp from the grounding point, then the red clamp from the positive battery terminal.
- Allow the Vehicle to Run⁚ Let the vehicle run for at least 15 minutes to allow the battery to recharge.
- Recheck Battery⁚ After the vehicle has been running for 15 minutes, check the battery voltage. If the voltage is still low, it may be necessary to charge the battery with a separate charger or have it checked by a mechanic.
It’s important to note that the GB40 is designed to jump-start 12-volt lead-acid batteries down to 2-volts. If your battery is below 2-volts, the Boost LED will be off, indicating that the GB40 cannot detect a battery.
Low Voltage Batteries & Manual Override
The GB40 is designed to jump-start 12-volt lead-acid batteries down to 2-volts. If your battery is below 2-volts, the Boost LED will be Off. This is an indication that the GB40 cannot detect a battery. If you need to jump-start a battery below 2-volts, the GB40 offers a Manual Override feature.
The Manual Override feature bypasses the GB40’s safety features, allowing you to jump-start a battery that is below 2-volts. However, it’s important to understand that using Manual Override disables all safety features, so it should only be used as a last resort.
To activate Manual Override⁚
- Press and hold the Manual Override Button (a red exclamation point icon inside a red circle) for 3 seconds until the Charge LEDs start to chase.
- The White Boost LED will flash On and Off indicating you have successfully entered into Manual Override and it is ready to jump start your vehicle.
WHEN USING MANUAL OVERRIDE ALL SAFETY FEATURES WILL BE DISABLED. Use caution when using this feature and ensure that the GB40 is connected properly to the battery. Refer to the video below for a visual demonstration.
Understanding Charge LEDs
The GB40 features a set of four LEDs that indicate the charge level of the unit. These LEDs provide a quick and easy way to check the status of the GB40’s battery, ensuring you’re always prepared to jump-start your vehicle.
Here’s a breakdown of what the LED colors mean⁚
- Green⁚ Indicates a fully charged battery.
- Yellow⁚ Indicates a medium charge level.
- Red⁚ Indicates a low charge level. It’s time to recharge the GB40!
- Flashing White⁚ Indicates that Manual Override is active.
By monitoring these LEDs, you can stay informed about the GB40’s charge status and ensure you’re always ready for unexpected situations. Always remember to recharge the GB40 after each use to maintain its optimal performance and ensure you have the power you need when you need it most.
Regularly checking the LED indicators will help you avoid a situation where the GB40 is out of charge when you need it most.
User Interface
The NOCO Genius Boost GB40 features a user-friendly interface designed for easy operation. Its compact size and intuitive design make it simple to use, even in challenging situations. The GB40’s interface consists of a power button, a manual override button, and a set of four LEDs that indicate the charge level of the unit.
The power button, located on the top of the GB40, is used to turn the unit on and off. When you press the power button, the GB40 will power up and the charge LEDs will illuminate, indicating the current charge level.
The manual override button, situated next to the power button, is used to activate the manual override feature. This feature allows you to jump-start a battery that is below the GB40’s standard detection threshold of 2 volts. Pressing and holding the manual override button for three seconds will activate the feature, and the charge LEDs will start to chase, indicating that the GB40 is ready to jump-start a low-voltage battery.
The GB40’s user interface ensures that you can easily monitor the unit’s status and activate the necessary features to jump-start your vehicle, even in challenging situations. Its straightforward design makes it accessible to users of all experience levels.
Recharging the GB40
The NOCO Genius Boost GB40 is a powerful and versatile jump starter, but it requires regular recharging to maintain its functionality. Here’s how to recharge your GB40⁚
Locate the USB IN Port⁚ The GB40 has a Micro-USB IN port located on the end of the unit. This port is designed for charging.
Connect the USB Cable⁚ Use the provided USB cable to connect the Micro-USB end to the USB IN port on the GB40. Connect the other end of the cable to a powered USB charger.
Begin Charging⁚ Once the cable is connected, the GB40 will begin charging. You can monitor the charging process through the LEDs on the unit. The LEDs will indicate the charge level as the unit recharges.
Full Charge Time⁚ The GB40 typically takes around 4-6 hours to fully recharge. It’s important to allow the unit to charge completely before using it. A fully charged GB40 will provide optimal performance and jump-starting capacity.
Safe Charging Practices⁚ Always use the provided USB cable and a compatible USB charger to recharge your GB40. Avoid using incompatible chargers or cables, as they may damage the unit or cause safety hazards. Store the GB40 in a cool, dry place when not in use.
